WH107资料

*Customer: Pb Free SPECIFICATION ITEM CHIP LED DEVICE MODEL WH107 REVISION DATE Rev0.0(070102) [Contents] 1. Features 2. Absolute maximum ratings 3. Electro-optical characteristics 4. Soldering profile 5. Outline dimension 6. Packing 7. Reel packing structure 8. Precaution for use 9. Label 10. Rank Customer Approved by Approved by Approved by Supplier Drawn by SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 Checked by Approved by SSC-WH107 Seoul Semiconductor- 1/9 - 元器件交易网www.cecb2b.com

1. Features * White color lighting SMD Chip LED * Package : 1.6×0.8×0.25mm, Flat molding =2. Absolute maximum ratings (Ta=25℃) Parameter Symbol Value Unit Power Dissipation Forward Current Peak Forward Current Reverse Voltage Operating Temperature Storage Temperature PD 62 ㎽ IF 20 ㎃ IFM*1 100 ㎃ VR 5 V Topr -30 ~ 80 ℃ Tstg -40 ~ 100 ℃ *1 IFM conditions: Pulse width Tw≤0.1ms, Duty ratio≤1/10 3. Electro-optical characteristics (Ta=25℃) Characteristics Forward Voltage Reverse Current Luminous Intensity *2 Chromaticity Coordinates Viewing angle*3 *3SymbolVF IR IV X Y Condition Min Typ Max UnitIF=5㎃ 2.7 2.9 3.1 V VR5V - - 10 ㎂ IF=5㎃ IF=5㎃ IF=5㎃ IF=5㎃ 100 150 230 mcd0.227 0.270 0.321 0.220 0.265 0.310 - 160 - ˚ Δ1/2θ *2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 θ1/2 is the off-axis where the luminous intensity is 1/2 the peak intensity. SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-WH107 - 2/9 - 元器件交易网www.cecb2b.com

[Note] ( Tolerance : IV±10%, color coordinate ±0.01, VF ±0.1 ) 4. Soldering profile Reflow Soldering Conditions/ Profile (1) Lead Solder -Preliminary heating to be at 150℃max. for 2 minutes max. -Soldering heat to be at 240℃max. for 5 seconds max. LED Surface temperature°COperation heating240150~Pre-heatingTemperaturerise: 5°C/sec.Cooling:-5°C/sec.120060 to 120 sec.5sec. max (2) Lead-Free Solder -Preliminary heating to be at 150℃max. for 2 minutes max. -Soldering heat to be at 260℃max. for 10 seconds max. LED Surface temperature°COperation heating260150~1200Pre-heatingTemperaturerise: 5°C/sec.Cooling:-5°C/sec.60to120sec.5to10sec. (3) Hand Solder -Not more than 3 seconds @MAX280℃, under Soldering iron. SEOUL SEMICONDUCTOR CO,. LTD. SSC-QP-0401-06(REV.0) - 3/9 - SSC-WH107 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 元器件交易网www.cecb2b.com5. Outline dimension Tolerance: ±0.05, Unit: ㎜ 0.30.10Resin1.11.61.2Polarity MarkCathode0.82.4PCB0.30.80.25±0.03Anode0.8[Recommended Solder Pattern]6. Packing 1.5+0.1-0±0.051.85±0.051.752.0±0.05±0.14.0±0.10.2±0.053.5(2.75)4.0±0.10.5±0.080.95±0.058.0±0.20.5±0.05180+0-311.49±0.32±0.2+0.2-02213±0.260LabelTolerance ±0.2, Unit : mm (1) Quantity : 4000pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10℃ angle to be the carrier tape (4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-WH107 - 4/9 - 元器件交易网www.cecb2b.com

7. Reel packing structure Reel ############ : N/P제품명 SSC-WH107######### oN toL수량 : 4000Aluminum Vinyl Bag############ : N/P제품명 SSC-WH107######### oN toL수량 : 4000Outer Box *Material: Paper(SW3B(B))a7inch245cCHIP LED701HW-CSS : TRAPTYPESIZE(mm)b220c142CHIP LEDba : EDOCAE000,04 : TY'Q : ON TOL : ETADDTL,.OC ROTCUDNOCIMES LUOES SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-WH107 - 5/9 - 元器件交易网www.cecb2b.com

8. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant . Otherwise, to store them in the following environment is recommended. Temperature : 5℃~30℃ Humidity : 60%HR max. (2) Attention after opened However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40℃ Humidity : less than 30% (3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 60±5℃. (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 80±5℃ or 12Hr at 100±5℃. (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (10) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (11) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (12) The LEDs must be soldered within seven days after opening the moisture-proof packing. (13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (14) The appearance and specifications of the product may be modified for improvement without notice. SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-WH107 - 6/9 - 元器件交易网www.cecb2b.com

9. Label P/N : #########제품명 SSC-WH107###Lot No CAA061013#######-##수량 : 4000 SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 Rank Day Month Year SSC-WH107 - 7/9 - 元器件交易网www.cecb2b.com

10. Rank 1) 광도: Iv [mcd] Rank Iv [mcd] Condition C D 100 ~ 150 150 ~ 230 IF=5mA 2) 색좌표: x, y (Condition : 5mA) Rank x 0.227 0.268 0.286 0.245 y 0.220 0.220 0.250 0.250 IF=5mA A Condition Rank x 0.245 0.286 0.303 0.263 y 0.250 0.250 0.280 0.280 IF=5mA B Condition Rank x 0.263 0.303 0.321 0.281 y 0.280 0.280 0.310 0.310 IF=5mA C Condition 3) 전압: VF Rank VF (V) Condition IF=5mA A 2.7 2.8 B 2.8 2.9 C 2.9 3.0 SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-WH107 - 8/9 - 元器件交易网www.cecb2b.com

D 3.0 3.1 ♦ Rank Division Iv [mcd] (IF=5 mA) Color coordinate (IF=5 mA) VF [V] (IF=5 mA) Rank C A A CAA C A B CAB C A C CAC C A D CAD C B A CBA C B B CBB C B C CBC C B D CBD C C A CCA C C B CCB C C C CCC C C D CCD D A A DAA D A B DAB D A C DAC D A D DAD D B A DBA D B B DBB D B C DBC D B D DBD D C A DCA D C B DCB D C C DCC SSC-WH107 SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 9/9 - 元器件交易网www.cecb2b.com

D C D DCD SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-WH107 - 10/9 -