总公司传动齿轮9 FE 75W-80传动油说明书

Transmission OilKEY DATAVERY HIGH PERFORMANCE LUBRICANT FOR HEAVY DUTY MANUAL AND AUTOMATED TRANSMISSIONSSAE 75W-80 FUEL ECONOMYINTERNATIONAL STANDARDSAPI GL-4MANUFACTURER APPROVALSZF TE-ML 01E / 02E / 16PVOITH CLASS CVOLVO 97307MAN 341 type Z5 MAN 341 type VR MB-Approval 235.29Applications

TOTAL TRANSMISSION GEAR 9 FE 75W-80 is a synthetic based lubricant for manual and automated gearboxes, whether synchronized or non- synchronized, running under the most severe conditions of load, speed and temperature. TOTAL TRANSMISSION GEAR 9 FE 75W-80 is specifically developed for all ZF gearboxes with or without Intarder allowing a drain interval up to 540.000 km. This lubricant is particularly suited for latest ZF gearboxes with Carbon synchronization (ZF TE-ML 01E) and for ZFgearboxes with Molybdenum synchronization (ZF TE-ML 02E).

TOTAL TRANSMISSION GEAR 9 FE 75W-80 is a lubricant with VOLVO 97307 approval (Drain interval up to 400.000km).

TOTAL TRANSMISSION GEAR 9 FE 75W-80 is developed for MAN 341 type Z5 approval (Drain interval up to 500.000km) with or without Intarder.

TOTAL TRANSMISSION GEAR 9 FE 75W-80 is also approved forretarder application VOITH CLASS C, MAN 341 type VR, MB-Approval 235.29 with the maximum drain interval of 240.000 km.

TOTAL TRANSMISSION GEAR 9 FE 75W-80 is particularly suitable for extended drain intervals on gearboxes of commercial vehicles from Renault Trucks, DAF, Iveco and for all commercial vehicles equipped with manual and automated gearboxes and any application requiring an API GL-4 level of performance.

www.lubricants.total.comCustomer benefits

••••••••Reduced fuel consumption in comparison with standard lubricants due to TOTAL’s Fuel Economy technology. Reduced cost of maintenance: specially formulated to reach extended drain intervals recommended by the manufacturer.

Excellent protection of gearboxes against wear and corrosion due to extreme-pressure properties of oil. Improved driver start up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption. Excellent stability in operation due to high viscosity index High compatibility with oil filters due to antifoam properties

Improved gear engagement: gear shiftability with a variety of synchroniser materials such as sinter, molybdenum and carbon.

Supports rationalisation of products (ZF, VOITH, VOLVO, MAN, MERCEDES BENZ)

Characteristics*

Test

Volumetric mass at 15°C

Viscosity at 40°CViscosity at 100°CViscosity indexFlash pointPour point

Viscosity Brookfield at -40°C

Unitkg/m

223

Test methodDIN 51757 D ASTM D445 ASTM D445 ASTM D2270 ASTM D92 ASTM D97 ASTM D-2983

Result858 54 9.35 157 240 -42 42 400

mm/s mm/s - °C °C mPa.s

* The characteristics given above are obtained with a standard tolerance threshold during production and may not be considered specifications.

Recommendations for use

Before using the product, the vehicle's maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer's recommendations.

The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations.

If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product's label from rubbing off.

Health, safety and the environment

Based on the toxicological information available, this product should not cause any adverse health effects, provided it is used for its intended purpose and in accordance with the recommendations laid out in the Safety Data Sheet. This can be obtained on request from your local reseller and is available for consultation at www.quickfds.fr. This product should not be used for any purposes other than the ones for which it is intended.

When disposing of the product after use, please protect the environment and comply with local regulations.

TOTAL LUBRIFIANTS – Immeuble Spazio562, avenue du Parc de l’île92029 Nanterre cedexFrance

TRANSMISSION GEAR 9 FE 75W-80

Last update of this datasheet: 08/2019

Some variations can be expected under normal production conditions, but these should not affect the product’s expected performance irrespective of the site. The information contained in this document is subject to change without notice. Our products can be viewed on our website at www.lubricants.total.com.