YG-301M SPEC_V1。1_8610_20说明书标准书

Product Specification

CLASS Ⅱ

CSR8610_20 MONO AUDIO ROM MODULE

DRAWN BY ： Wangcs

MODEL : YG-301M-C/D

DESCRIPTION :

CSR8610_20(ROM )Module

REV : 1.1

CHECKED BY ：

APPD. BY：

Issue Date :2013-07-22 13---１

7/23/2013 SHENZHEN YECON INDUSTRY Co., LTD

Contents

1. Product Photo 2. Feature

3. Summary of Benefit

4. Device Terminal Function 5. Block Diagram

6. Electrical Specification: 7. Schematic Diagram 8. Testing Block Diagram

Fig 1 Programming and Freq. Alignment Test Procedure Fig 2 RF Parameter Test procedure

Fig 3 Assemble/Alignment/Testing Flow Chart

Issue Date :2013-07-22 13---２

7/23/2013 SHENZHEN YECON INDUSTRY Co., LTD

1. Product Photo

13.2X27.7X2.0(MM)

Issue Date :2013-07-22 13---３

7/23/2013 SHENZHEN YECON INDUSTRY Co., LTD

2．Feature

■80MHz RISC MCU and 80MIPS Kalimba DSP

■Internal ROM, serial flash memory and EEPROM interfaces

■Mono DAC codec with 2 microphone inputs(8610 1- mic)

■CSR's latest CVC technology for narrowband and wideband voice connections including wind noise Reduction

■Wideband speech supported by HFP v1.6 profile and mSBC codec ■Voice recognition support for answering a call, enables true hands-free use

■Multipoint HFP connection to 2 phones for voice

■Multipoint A2DP connection enables a headset (A2DP) connection to 2 A2DP source devices for music playback

■Secure simple pairing, CSR's proximity pairing and CSR's proximity connection

■Audio interfaces: I²S and PCM

■Serial interfaces: UART, USB v2.0 (full-speed),I²C and SPI

■Integrated dual switch-mode regulators, linear regulators and battery charger

■ Green ( RoHS compliant and no antimony or halogenated flame retardants)

Issue Date :2013-07-22 13---４

7/23/2013 SHENZHEN YECON INDUSTRY Co., LTD

3．Summary of Benefit

■The YG-310M Module consumer audio platform for wired and wireless applications integrates an ultra-low-power DSP and application processor with embedded flash memory, a high-performance stereo codec, a power management subsystem, LED and LCD drivers and capacitive touch sensor inputs in a SOC IC. The dual-core architecture with flash memory enables manufacturers to easily differentiate their products with new features without extending development cycles.

■The enhanced Kalimba DSP coprocessor with 80MIPS supports enhanced audio and DSP applications. ■Smallest footprint, 13.7mmX27.7mm

■This module supports internal antenna and external antenna ■Low-power Solution for DSP Intensive Audio Applications

Applications:

■2-mic mono headset(1-mic 8610)

■Support for smart phone/tablet applications ■Bluetooth hands-free car-kits ■Speakerphones

Issue Date :2013-07-22 13---５

7/23/2013 SHENZHEN YECON INDUSTRY Co., LTD

4．Device Terminal Function

PIN Name

GND

Description

Ground pot

Max 200mA

PIN #

1，3,16，17，18，36，

Pad type

VSS

Note

1V8 BATT VBUS VREGEN PIO7 PIO9

14 15 13 12 19 20

1V8 Battery terminal Charger input Analogue Bidirectional with weak pull-down l Bidirectional with weak pull-down CMOS Input with weak intemal pull-down Programmable input/output line2 Programmable input/output line4 Programmable input/output line5 Programmable input/output line3 Analogue input Analogue input Analogue input

OUTPUT 1.8V (+) supply Lithium ion/polymer battery

positive terminal. Lithium ion/polymer battery

charger input Regulator enable input Programmable input/output line Programmable input/output line

Reset if low, Pull low for minimum 5ms to cause a reset SPI_MOSI/PCM1_IN/PIO2 SPI_CS/PCM1_SYNC/PIO4 SPI_CLK/PCM1_CLK/PIO5 SPI_MISO/PCM1_OUT/PIO3

RESET 11

SPI-MOSI SPI-CSB SPI-CLK SPI-MISO

7 4 8 5

MIC-BP MIC-BN MIC_AP

27 28 31

Microphone input R positive Microphone input R negative Microphone input L positive

8620 ONLY 8620 ONLY Microphone Left Positive

Issue Date :2013-07-22 13---６

7/23/2013 SHENZHEN YECON INDUSTRY Co., LTD

MIC_AN MIC-BIAS

NC NC SPK_LP SPK_LN ANT LED0 LED1 SPI_SEL PIO21 PIO18 PIO6 PIO0 USB_DP USB_DN

30 29 32 33 34 35 2 10 9 6 26 25 24 23 22 21

Analogue input Analogue NC NC Analogue output Analogue output

Analogue Open drain output Open drain output Input with weak pull-down Bidirectional with weak pull-down Bidirectional with weak pull-down Bidirectional with weak pull-down Bidirectional with weak pull-down

NC NC

Microphone input L negative

Microphone bias

NC NC

Speaker output L positive Speaker output L negative

RF In/Out LED driver LED driver SPI/PCM select input Programmable input/output line Programmable input/output line Programmable input/output line Programmable input/output line

NC NC

Microphone Left Negative

NC NC Left Positive Left Negative

0=PCM/PIO 1=SPI

Issue Date :2013-07-22 13---７

7/23/2013 SHENZHEN YECON INDUSTRY Co., LTD

5. Block Diagram

Issue Date :2013-07-22 13---８

7/23/2013 SHENZHEN YECON INDUSTRY Co., LTD

6. Electrical Specification:

Absolute Maximum Ratings

Recommended Operating Conditions

Issue Date :2013-07-22 13---９

7/23/2013 SHENZHEN YECON INDUSTRY Co., LTD

Issue Date :2013-07-22 13---１０

7/23/2013 SHENZHEN YECON INDUSTRY Co., LTD

7. Schematic Diagram(This is for your reference only)

Issue Date :2013-07-22 13---１１

7/23/2013 SHENZHEN YECON INDUSTRY Co., LTD

8. Testing Block Diagram

Fig 1 Programming and Freq. Alignment Test Procedure

Fig 2

RF Parameter Test procedure

Issue Date :2013-07-22 13---１２

7/23/2013 SHENZHEN YECON INDUSTRY Co., LTD

Issue Date :2013-07-22 13---１３