2、接着卸载jdk-1.7.0_76，再次重新安装。卸载方法：
先查看jdk-1.7.0_76包名
#rpm -qa | grep jdk
接着执行
#rpm -e jdk-1.7.0_76-fcs
卸载完后，再次重新安装jdk-7u76-linux-x64.rpm 。
5、控制台安装：
一、安装weblogic10.3.6 64位：
-bash-4.1$ java -jar wls1036_generic.jar
Unable to instantiate GUI, defaulting to console mode.无法实例化 GUI，默认进入控制台模式。
Extracting 0%…100%
This installer will guide you through the installation of WebLogic 10.3.6.0.
Type “Next” or enter to proceed to the next prompt. If you want to change data entered previously, type “Previous”. You may quit the installer at any time by typing “Exit”.
Enter [Exit][Next]> 回车
"Middleware Home" = [Enter new value or use default
“/bea/weblogic/Oracle/Middleware”]
Enter new Middleware Home OR [Exit][Previous][Next]> /bea/weblogic/
"Middleware Home" = [/bea/weblogic]
Use above value or select another option:
1 - Enter new Middleware Home
2 - Change to default [/bea/weblogic/Oracle/Middleware]
Enter option number to select OR [Exit][Previous][Next]> 1
"Middleware Home" = [/bea/weblogic]
Enter new Middleware Home OR [Exit][Previous][Next]>
Warning
/bea/weblogic directory is not empty. Proceed with installation?
Enter [Exit][Previous][Next]>
Provide your email address for security updates and to initiate configuration manager.
1|Email:[]
2|Support Password:[]
3|Receive Security Update:[Yes]
Enter index number to select OR [Exit][Previous][Next]> 3
Provide your email address for security updates and to initiate configuration manager.
“Receive Security Update:” = [Enter new value or use default “Yes”]
Enter [Yes][No]? no
Provide your email address for security updates and to initiate configuration manager.
“Receive Security Update:” = [Enter new value or use default “Yes”]
Enter [Yes][No]? yes
Provide your email address for security updates and to initiate configuration manager.
1|Email:[]
2|Support Password:[]
3|Receive Security Update:[No]
Enter index number to select OR [Exit][Previous][Next]>
Provide your email address for security updates and to initiate configuration manager.
1|Email:[]
2|Support Password:[]
3|Receive Security Update:[No]
Enter index number to select OR [Exit][Previous][Next]>
Select the type of installation you wish to perform.
->1|Typical
| Install the following product(s) and component(s):
| - WebLogic Server
| - Oracle Coherence
2|Custom
| Choose software products and components to install and perform optional
|configuration.
Enter index number to select OR [Exit][Previous][Next]> 2
Release 10.3.6.0
|_____WebLogic Server [1] x
| |_____Core Application Server [1.1] x
| |_____Administration Console [1.2] x
| |_____Configuration Wizard and Upgrade Framework [1.3] x
| |_____Web 2.0 HTTP Pub-Sub Server [1.4] x
| |_____WebLogic SCA [1.5] x
| |_____WebLogic JDBC Drivers [1.6] x
| |_____Third Party JDBC Drivers [1.7] x
| |_____WebLogic Server Clients [1.8] x
| |_____WebLogic Web Server Plugins [1.9] x
| |_____UDDI and Xquery Support [1.10] x
| |_____Server Examples [1.11]
| |_____Evaluation Database [1.12] x
|_____Oracle Coherence [2] x
|_____Coherence Product Files [2.1] x
|_____Coherence Examples [2.2]
*Estimated size of installation: 690.2 MB
Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]> 2
Release 10.3.6.0
|_____WebLogic Server [1] x
| |_____Core Application Server [1.1] x
| |_____Administration Console [1.2] x
| |_____Configuration Wizard and Upgrade Framework [1.3] x
| |_____Web 2.0 HTTP Pub-Sub Server [1.4] x
| |_____WebLogic SCA [1.5] x
| |_____WebLogic JDBC Drivers [1.6] x
| |_____Third Party JDBC Drivers [1.7] x
| |_____WebLogic Server Clients [1.8] x
| |_____WebLogic Web Server Plugins [1.9] x
| |_____UDDI and Xquery Support [1.10] x
| |_____Server Examples [1.11]
| |_____Evaluation Database [1.12] x
|_____Oracle Coherence [2]
|_____Coherence Product Files [2.1]
|_____Coherence Examples [2.2]
*Estimated size of installation: 678.7 MB
Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]>
JDK(s) chosen will be installed. Defaults will be used in script string-substitution if installed.
1|Add Local Jdk
2|/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64[x]
*Estimated size of installation: 678.7 MB
Enter 1 to add or >= 2 to toggle selection OR [Exit][Previous][Next]>
Middleware Home Directory: [/bea/weblogic]
Product Installation Directories:
"WebLogic Server" = [Enter new value or use default
“/bea/weblogic/wlserver_10.3”]
Enter new WebLogic Server OR [Exit][Previous][Next]>
WebLogic Platform 10.3.6.0
|_____WebLogic Server
|_____Core Application Server
|_____Administration Console
|_____Configuration Wizard and Upgrade Framework
|_____Web 2.0 HTTP Pub-Sub Server
|_____WebLogic SCA
|_____WebLogic JDBC Drivers
|_____Third Party JDBC Drivers
|_____WebLogic Server Clients
|_____WebLogic Web Server Plugins
|_____UDDI and Xquery Support
|_____Evaluation Database
*Estimated size of installation: 678.8 MB
Enter [Exit][Previous][Next]>
<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
Installing files…
0% 25% 50% 75% 100%
[------------|------------|------------|------------]
[***************************************************]
Performing String Substitutions…
<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
Configuring OCM…
0% 25% 50% 75% 100%
[------------|------------|------------|------------]
[***************************************************]
Creating Domains…
<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
Installation Complete
Congratulations! Installation is complete.
Press [Enter] to continue or type [Exit]>
<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->
Clean up process in progress …
二、配置domains —>>>>>>>>>>>>>>>>>>>>>>>>>>>>
cd /home/weblogic/Oracle/Middleware/wlserver_10.3/common/bin
-bash-4.1$ ./config.sh
Unable to instantiate GUI, defaulting to console mode.
Choose between creating and extending a domain. Based on your selection,
the Configuration Wizard guides you through the steps to generate a new or
extend an existing domain.
->1|Create a new WebLogic domain
| Create a WebLogic domain in your projects directory.
2|Extend an existing WebLogic domain
| Use this option to add new components to an existing domain and modify |configuration settings.
Enter index number to select OR [Exit][Next]> 1
Select the source from which the domain will be created. You can create the
domain by selecting from the required components or by selecting from a
list of existing domain templates.
->1|Choose Weblogic Platform components
| You can choose the Weblogic component(s) that you want supported in
|your domain.
2|Choose custom template
| Choose this option if you want to use an existing template. This
|could be a custom created template using the Template Builder.
Enter index number to select OR [Exit][Previous][Next]> 1
Available Templates
|_____Basic WebLogic Server Domain - 10.3.6.0 [wlserver_10.3]x
|_____Basic WebLogic SIP Server Domain - 10.3.6.0 [wlserver_10.3] [2]
|_____WebLogic Advanced Web Services for JAX-RPC Extension - 10.3.6.0 [wlserver_10.3] [3]
|_____WebLogic Advanced Web Services for JAX-WS Extension - 10.3.6.0 [wlserver_10.3] [4]
Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]>
| Name | Value |
|________|____________|
1| *Name: | base_domain |
Enter value for “Name” OR [Exit][Previous][Next]> wlyxweb
| Name | Value |
|||
1| *Name: | wlyxweb |
Use above value or select another option:
1 - Modify “Name”
2 - Discard Changes
Enter option number to select OR [Exit][Previous][Next]>
"Target Location" = [Enter new value or use default
“/bea/weblogic/user_projects/domains”]
Enter new Target Location OR [Exit][Previous][Next]> /wlyx/webapp/domains
Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.
| Name | Value |
|________________________|_________________________________________|
1| *Name: | weblogic |
2| *User password: | |
3| *Confirm user password: | |
4| Description: | This user is the default administrator. |
Use above value or select another option:
1 - Modify “Name”
2 - Modify “User password”
3 - Modify “Confirm user password”
4 - Modify “Description”
Enter option number to select OR [Exit][Previous][Next]> 2
Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.
“*User password:” = []
Enter new *User password: OR [Exit][Reset][Accept]> welwlyx50
Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.
| Name | Value |
|________________________|_________________________________________|
1| *Name: | weblogic |
2| *User password: | ********* |
3| *Confirm user password: | |
4| Description: | This user is the default administrator. |
Use above value or select another option:
1 - Modify “Name”
2 - Modify “User password”
3 - Modify “Confirm user password”
4 - Modify “Description”
5 - Discard Changes
Enter option number to select OR [Exit][Previous][Next]> 3
Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.
“*Confirm user password:” = []
Enter new *Confirm user password: OR [Exit][Reset][Accept]> welwlyx50
Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.
| Name | Value |
|________________________|_________________________________________|
1| *Name: | weblogic |
2| *User password: | ********* |
3| *Confirm user password: | ********* |
4| Description: | This user is the default administrator. |
Use above value or select another option:
1 - Modify “Name”
2 - Modify “User password”
3 - Modify “Confirm user password”
4 - Modify “Description”
5 - Discard Changes
Enter option number to select OR [Exit][Previous][Next]>
Enable Development or Production Mode for this domain.
->1|Development Mode
2|Production Mode
Enter index number to select OR [Exit][Previous][Next]> 1
->1|N/A SDK 1.6.0_24 @ /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64
2|Other Java SDK
Enter index number to select OR [Exit][Previous][Next]> 2
"JVM Directory" = []
Enter new JVM Directory OR [Exit][Previous][Next]> /bea/jdk/jdk1.6.0_37
"JVM Directory" = [/bea/jdk/jdk1.6.0_37]
Enter new JVM Directory OR [Exit][Previous][Next]>
1|Administration Server [ ]
2|Managed Servers, Clusters and Machines [ ]
3|RDBMS Security Store [ ]
Enter index number to select OR [Exit][Previous][Next]> 1
1|Administration Server [x]
2|Managed Servers, Clusters and Machines [ ]
3|RDBMS Security Store [ ]
Enter index number to select OR [Exit][Previous][Next]>
Each WebLogic Server domain must have one Administration Server. The
Administration Server is used to perform administrative tasks.
| Name | Value |
|_________________|_____________________|
1| *Name: | AdminServer |
2| *Listen address: | All Local Addresses |
3| Listen port: | 7001 |
4| SSL listen port: | N/A |
5| SSL enabled: | false |
Use above value or select another option:
1 - Modify “Name”
2 - Modify “Listen address”
3 - Modify “Listen port”
4 - Modify “SSL enabled”
Enter option number to select OR [Exit][Previous][Next]>
<------------------- Fusion Middleware Configuration Wizard ------------------>
Creating Domain…
0% 25% 50% 75% 100%
[------------|------------|------------|------------]
[***************************************************]
**** Domain Created Successfully! ****
四：weblogic的使用 --》》》》》》》》》》》》》》》》》》》》》》》》》
1、启动服务时无需输入用户名和密码
进入到你新建的域中：cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain/servers/AdminServer
然后在该文件夹下新建名为security的文件夹：mkdir security
在刚刚新建是文件夹中新建名为boot.properties文件：vi boot.properties
然后在该文件中输入：
username=weblogic
password=weblogc123
保存后退出。重启weblogic。此时你会发觉，weblogic再也不会提示要求你输入weblogic管理台的用户名和密码了。
重启后我们来到刚刚的新建的文件夹中查看新建的文件：
cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain/servers/AdminServer/security
vi boot.properties发现它的内容已经变成下面这个样子了：
#Sun Aug 04 10:23:54 CST 2013
password={AES}KWRQeICbIyJLO3zh+v+/9JeJtCzpK9ge6j4pqf9sSqA=
username={AES}ICJVfwErXU5MOQyVPzcvVpKBkK6gI6UFlwqkkEuVgBg=
Weblogic把它给加密了，因此只有装Weblogic的那个人即System Admin才真正知道Weblogic控制台的登录信息，这样就很安全了。
2、启动weblogic服务
cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain
./startWeblogic.sh
nohup ./startWeblogic.sh &(nohup命令：如果你正在运行一个进程，而且你觉得在退出帐户时该进程还不会结束，那么可以使用nohup命令。
该命令可以在你退出帐户/关闭终端之后继续运行相应的进程。nohup就是不挂起的意思( no hang up))
因篇幅问题不能全部显示，请点此查看更多更全内容